Lasko Oscillating Ceramic Tower Review: Even Heat, Remote Control
On this page 9 sections
- Key Specifications
- How This Ceramic Tower Distributes Heat
- What This Heater Does Well
- Limits and Trade-Offs of the Lasko 755320
- Running Costs and Sizing Guidance
- Safety Features to Trust in This Heater
- How It Compares to Other Lasko Ceramic Towers
- Lasko Ceramic Tower Heater Alternatives
- Frequently Asked Questions
Lasko Digital Ceramic Tower 755320
Many people think ceramic heaters just blow hot air in one spot. The truth is they can spread warmth evenly if designed right, as this Lasko model shows. It balances oscillation, thermostat control, and safety to deliver steady heat without the noise or hot spots you get from cheaper space heaters.
This review focuses on the Lasko Oscillating Digital Ceramic Tower Heater 755320, explaining how it works, what it does well, its limitations, running costs, and how it stacks up against similar heaters.
Key Specifications
| Power | 1500W |
|---|---|
| Height | 23 inches |
| Heat settings | 2 quiet settings: high heat and low heat |
| Timer | 1-8 hours in 1-hour increments |
| Controls | Adjustable thermostat and multi-function remote control |
| Safety | Overheat protection, cool-touch exterior and ETL listed |
How This Ceramic Tower Distributes Heat
A ceramic tower heater warms the room by pushing air across a ceramic heating element, then sweeping that warm air from side to side instead of aiming it at one patch of floor. That combination is why the Lasko Oscillating Ceramic Tower heater feels more even than a fixed heater in a bedroom or office.
The ceramic heating element uses electrical resistance to heat the air passing through it. A fan pulls cooler room air into the tower, the element warms that air, and the fan sends it back into the room by convection. Warm air rises, mixes with cooler air, and gradually raises the room temperature. Ceramic heating doesn’t mean the unit makes heat without electricity; the ceramic part controls and transfers the heat rather than acting like a glowing wire.
Lasko’s widespread oscillation turns the tower through a broad left-to-right sweep, so the air stream reaches more of the room. A fixed heater has a 0-degree spread from its front face. Typical oscillating models use a narrower sweep, which can leave a cold corner or warm one chair rather enthusiastically. The wider movement reduces those hot and cold spots, although furniture and room layout still matter.
At the low setting, the fan noise stays quiet enough for a bedroom or desk area, while the high setting produces more audible airflow as it moves more warm air. No fan heater is silent, but the low setting is the useful one when a ticking thermostat would otherwise become the loudest thing in the room.
Ceramic elements also avoid the exposed, glowing-wire feel of older resistance heaters. Airflow carries heat away from the element, and the tower’s housing is designed to remain cool to the touch during normal operation. That improves comfort around the heater, but it doesn’t make the heater burn-proof: keep the required clearance, don’t cover the air openings, and don’t touch the outlet grille immediately after shutdown.
If you want to compare the heat pattern with other models, this Lasko oscillating ceramic heater review focuses on even warmth and hot spots, while the Lasko ceramic tower heater review looks at vertical heat coverage.
What This Heater Does Well
The Lasko ceramic tower heater gets the basics right for supplemental heat: 1,500 W of output, quiet operation, a digital thermostat, a remote, and a timer that doesn’t require you to leave the sofa. That power level is standard for a plug-in heater intended to take the chill off a medium room, rather than heat an entire home.
Its digital thermostat maintains the set temperature within about 2°F, so the heater can cycle on and off instead of blasting continuously. That tighter control helps keep the room from swinging between too warm and too cool. The thermostat measures the air near the heater, though, so placing the tower beside a cold exterior door can affect what it senses.
Two quiet heat settings give you a choice between gentler background warmth and faster recovery after the room cools down. Low is the better fit for sleep or focused work; high moves more heated air and makes more fan noise. Neither setting changes the basic electrical demand of a 1,500 W plug-in heater when the heating element is operating at full power.
The remote control handles the main adjustments from across the room, and its onboard storage keeps it with the heater instead of under a cushion. An adjustable timer from 1 to 8 hours can shut the unit off after a work session or before the night gets too warm. A timer saves energy only when it prevents run time, so it isn’t a magic reduction in the heater’s power draw.
A cool-touch exterior makes ordinary contact less alarming, while the ETL listing shows that the heater was evaluated to the applicable electrical safety requirements. Keep the tower on a stable surface with its openings clear, plug it directly into a wall outlet, and leave the built-in safety features unobstructed. A certification is useful evidence, not permission to defeat a safety switch.
Winter Heating Bill CutterSee what every heater in your home really costs, heat the rooms you use, and cut the waste in 30 days.Cost-per-hour tables for every heaterThermostat schedule and draft-proofing planRunning-cost and bill calculator (Excel)Limits and Trade-Offs of the Lasko 755320
The Lasko 755320 is a 1,500 W supplemental heater for medium rooms, and it works best up to about 150 square feet; it won’t carry a whole house or make a poorly insulated space comfortable by itself. Ceramic heaters move warm air quickly, while an oil column heater warms more gradually and keeps giving off heat after its element cycles off. Neither type creates more heat than its electrical input allows.
Is a ceramic heater better? Pick ceramic for faster spot heating, a smaller footprint and air that reaches across the room through the fan. Pick an oil-filled radiator if you prefer silent, gentle heat and don’t mind slower warm-up. Ceramic heaters aren’t automatically more efficient at the same wattage; a 1,500 W heater uses the same maximum electrical power whether its element is ceramic or enclosed in another design.
Oscillation spreads the output, but the Lasko 755320 can’t disable that sweep. If you want warm air aimed at one chair, desk or cold corner, a fixed-direction heater may suit you better. The digital controls, remote and thermostat are convenient once set up, though a simple dial unit takes less reading before its first cold-weather shift.
Running Costs and Sizing Guidance
A ceramic heater rated at 1,500 W uses about 1.5 kWh for every hour its heating element runs, so the Lasko 755320 fits a medium room best—around 150 square feet for effective heat distribution. A larger, open or drafty room may feel warm near the tower while the far side remains stubbornly chilly.
At an electricity rate of 17 cents per kWh, eight hours at full 1,500 W output is 1.5 × 8 = 12 kWh; the cost block calculates the resulting nightly cost. Actual use can be lower because the thermostat cycles the element instead of keeping it energized continuously once the room reaches the set temperature.
| Heater | Watts | Per hour | Per day (8 h) | Per month (30 days) |
|---|---|---|---|---|
| Lasko 755320 at full 1,500 W | 1,500 W | 26¢ | $2.04 | $61.20 |
Heat from a ceramic element reaches you quickly because a fan carries the warmed air into the room. Set the thermostat after the room has had time to warm, then use the timer to shut the heater off when you leave or go to bed; otherwise, you’re paying to heat an empty room, which is a poor roommate.
Safety Features to Trust in This Heater
A ceramic heater is an electric heater that warms air as it passes over a ceramic heating element, and the Lasko 755320 adds basic safeguards around that process. Overheat protection cuts power if the internal temperature rises too high, while the cool-touch exterior helps prevent burns even after hours of operation.
The ETL listing indicates that this heater complies with applicable US safety standards. That label is useful, but it doesn’t cancel the operating rules: plug the unit directly into a wall outlet, keep 3 feet of clearance around it, and don’t cover the air intake or outlet.
Ceramic heaters are reasonable for bedrooms and homes with pets or children when used as directed. Set the Lasko on a level, solid surface where a paw, toy or foot can’t knock it over; a tip-over switch isn’t explicitly listed for this model, so placement matters.
Keep curtains, bedding and furniture away from the tower, even though the outside stays cooler than the heating element. Automatic protection is a backup, not permission to turn the corner of the room into a storage closet.
How It Compares to Other Lasko Ceramic Towers
DeLonghi ceramic tower heater reviews are useful for a brand-to-brand comparison, but among Lasko models, this Lasko 1500W ceramic tower is the middle-ground choice: it keeps similar power and oscillation to the Lasko 5775 while adding a digital thermostat and a place to store the remote.
The Lasko 5775 makes more sense if you want a similar basic heating job without placing as much value on those control details. The 755320’s thermostat can hold a chosen room temperature more precisely than a simple high or low setting, and remote storage means the controller has a designated home instead of vanishing under the sofa.
The 360-degree oscillating Lasko CT24362 is the larger-coverage option. Its full-direction movement gives you more control over where the airflow travels and suits a larger room better, but the unit is taller and takes up more space. For a medium room, that extra reach may be unnecessary furniture.
| Model | What You Gain | Trade-Off |
|---|---|---|
| Lasko 755320 | Digital thermostat, remote storage, quiet operation and a compact footprint | Best suited to medium rooms rather than larger spaces |
| Lasko 5775 | Similar power and oscillation in a simpler design | Fewer controls and less thermostat precision |
| Lasko CT24362 | 360-degree oscillation and coverage for larger rooms | Taller, larger body and more floor space required |
Simpler Lasko towers are the better fit for someone who wants to set a heat level and leave the controls alone. Choose the 755320 if you want quieter supplemental heat, a digital thermostat and remote control without moving up to the CT24362’s larger footprint. For a closer look at this feature set, see the Lasko 1500W ceramic tower buying guide.
Lasko Ceramic Tower Heater Alternatives
Lasko Ceramic Tower 5775
