Heat Storm Phoenix Review: Infrared Heating With Smart Design
Joye
Updated September 30, 2026 15 min read
Our verdict
The Heat Storm Phoenix is a sensible small-room zone heater when you want soft infrared heat, a thermostat, and the choice of floor or wall placement. Its 1,500 watts won’t cover a large area or replace whole-home heating, so insulation and room size should decide the purchase.
Buy it if
Buy it for a small, reasonably insulated bedroom, office or other room where flexible placement and quiet zone heat matter.
Skip it if
Skip it if you need to heat a large, drafty area or want built-in smartphone control from the standard floor-or-wall model.
Best Flexible Setup
Heat Storm Phoenix Infrared Heater
Best for Small rooms or offices where floor or wall mounting both help
The Phoenix gives you 750-watt and 1,500-watt modes, so you can use less power when the room only needs a little help. Its infrared heat exchanger works with room humidity to provide soft heat without reducing oxygen or humidity. Removable feet, wall-mount points, a built-in thermostat and a remote make this the most flexible option here.
Power settings 750 W and 1,500 WHeat output 5,200 BTUMounting Floor or wallControls Built-in thermostat, LED display and remote controlGrill Safe to touch
Why it made the cut
750-watt and 1,500-watt heat settings
Can sit on the floor or mount on a wall
Safe-to-touch grill and built-in thermostat
Remote control included
Good to know
No Wi-Fi control
Designed for small-room zone heating
Wall mounting requires removing the attachable feet
Skip it if Skip it if you need app control or a wall-only heater with no floor setup.
The Heat Storm Phoenix infrared heater targets small rooms or offices with up to 5200 BTU of warmth. Its compact design lets you mount it on a wall or place it on the floor using removable feet. The heater features a built-in thermostat with LED display and a remote control for precise temperature management.
Using patented HMS infrared technology, the Phoenix warms objects and people directly, avoiding the dryness common in many electric heaters. It offers two power settings, 750 and 1500 watts, letting you balance heat output and energy use.
The essentials
The Phoenix delivers up to 5200 BTU, suitable for rooms roughly 150 square feet or smaller in well-insulated spaces.
Its infrared HMS technology warms without reducing humidity or oxygen levels, making it comfortable for extended use.
Flexible installation options include floor placement with feet or wall mounting; however, wall mounting hardware is not included.
The built-in thermostat and remote control enable easy, precise temperature adjustments.
This heater is best for supplemental heating in smaller rooms, not for large or drafty spaces.
What the Spec Sheet Says
Power settings
750 W and 1,500 W
Heat output
5,200 BTU
Mounting
Floor or wall
Controls
Built-in thermostat, LED display and remote control
Grill
Safe to touch
Heat Storm Phoenix Heater UL Approval and Safety
The Heat Storm Phoenix is safe for indoor zone heating only when your exact unit carries a recognized UL or ETL listing and you follow its clearance and plug-in instructions. The product information supplied here doesn’t confirm a certification mark, so check the rating label, packaging, or manual before buying; UL and ETL listings show that an independent testing organization evaluated the heater against applicable electrical-safety requirements.
Check Before You Plug It In
Look for a UL or ETL mark on the heater or its documentation; don’t treat a seller’s headline as proof.
Plug the Phoenix directly into a wall outlet, never an extension cord or power strip.
Keep about 3 feet of open space around the heater and away from curtains, bedding, paper and furniture.
Use the heater only on a stable floor with its feet attached, or mount it exactly as the manual specifies.
Don’t run it while sleeping or leave it operating in an empty house unless the manufacturer specifically says your model is designed for that use.
The Phoenix’s infrared element warms nearby surfaces and people, while its grill is designed to stay cooler than the heating element. That cooler grill lowers contact risk, but it isn’t a license to cover the heater or push furniture against it; hot air still needs room to leave, and the front can become warm during operation.
A tip-over switch cuts power if the floor-standing heater is knocked over, when that switch is fitted to your Phoenix version. Treat it as a backup rather than a setup feature: keep the unit upright, place it on a level surface, and don’t defeat or tape down the switch. Overheat protection or a thermal cutoff may also stop the heater if airflow is blocked or an internal temperature rises too far, but neither feature replaces clearance.
The Outlet Matters
A 1,500-watt heater draws about 12.5 amps on a 120-volt circuit. A shared circuit with a vacuum, hair dryer or another heater can trip a 15-amp breaker or heat a worn connection, so move the load rather than using a power strip.
Because the Phoenix is electric, it doesn’t burn fuel inside the room: it consumes no oxygen through combustion and produces no combustion exhaust. Infrared heating also doesn’t add moisture or remove it the way combustion can, although warmer air can show a lower relative-humidity reading. A CO alarm remains sensible in a home with fuel-burning appliances, but the Phoenix itself isn’t a carbon-monoxide source.
One Last Model Check
The Heat Storm Phoenix Infrared Space Heater with Attachable Feet, the HS-1500-PHX-WIFI and the NEW Touch Screen may have different controls or included safety hardware. Match the label and manual to the exact model before assuming a tip-over switch, sensor or certification applies.
How the Heat Storm Phoenix Heats and Its Performance Limits
The Heat Storm Phoenix review comes down to a 1,500-watt infrared heater that provides gentle zone heat well in a small, reasonably insulated room, but can’t replace a whole-home heating system in a large or drafty space. Its HMS infrared system sends radiant heat toward people, floors, walls and furniture, so the room can feel more comfortable before every cubic foot of air reaches the thermostat setting.
Convection heaters mainly warm air and wait for that air to circulate; the Phoenix also warms solid objects in its line of sight. Those objects then release heat back into the room, which is why you may feel the heater’s effect without the strong fan blast associated with many portable heaters. Radiant heat still depends on distance, room layout and blocked surfaces, so a cabinet or wall between you and the heater changes the result.
Setting
Electrical input
Approximate heat output
Low
750 W
About 2,600 BTU/h
High
1,500 W
About 5,200 BTU/h
The Phoenix’s two power levels let you reduce output after the room reaches a comfortable temperature; the BTU figures are approximate heat equivalents.
Worked Example
Say your 12 × 14-foot bedroom has average insulation, a closed door and a normal ceiling. That 168-square-foot room fits the Phoenix’s small-room, supplemental-heating job better than an open living area. Open the door to a cold hallway or add a drafty window, and the same 1,500 watts has more air and surfaces to warm, so recovery takes longer and the heater may run continuously.
Room size alone won’t predict performance. A small, insulated bedroom or office is the sensible target; a large open-plan room, high-ceiling space, uninsulated garage or room with persistent drafts is a poor match. In those spaces, the Phoenix can warm the area near the heater while leaving distant corners cold, even at its 5,200-BTU high setting.
The Phoenix operates silently because infrared heating doesn’t need a combustion burner, and the standard design doesn’t rely on a loud fan to move heat. Expect soft, steady warmth rather than a blast of hot air; that suits a desk, reading chair or bedroom zone, but it won’t quickly push heat through several closed rooms.
If you want to compare the Phoenix’s role with other Heat Storm infrared designs, the Heat Storm Phoenix infrared heater insights guide is the useful next step; choose by mounting style, controls and room duty rather than by the word infrared alone.
Running Costs and Sizing for the Heat Storm Phoenix
The Heat Storm Phoenix costs about $2.04 per eight-hour night at full 1,500-watt output if electricity costs 17 cents per kWh, but its thermostat can reduce that total by cycling the heating element off after the room reaches the set temperature.
Heater
Watts
Per hour
Per day (8 h)
Per month (30 days)
Phoenix at 1,500 W
1,500 W
26¢
$2.04
$61.20
Phoenix at 750 W
750 W
13¢
$1.02
$30.60
Calculated at 17¢ per kWh. Assumes eight hours per day, 30 days, and electricity at $0.17 per kWh. These are full-power figures before thermostat cycling.
The arithmetic is simple: 1,500 W ÷ 1,000 × 8 hours equals 12 kWh, and 12 × $0.17 equals $2.04 per night. At 25 cents per kWh, the same heater costs $3.00 per night. Half power uses 6 kWh over eight hours, costing $1.02 at 17 cents or $1.50 at 25 cents.
Oil-filled radiators, ceramic heaters, and electric fireplaces cost about the same to run at the same wattage because each turns electricity into heat at the room. Infrared heat can feel more direct near the heater, but it doesn’t make 1,500 watts of electricity cost less. A heat pump is the major exception because it moves heat instead of making all of it with a resistance element.
Match 5,200 BTU to the Room’s Heat Loss
The Phoenix is rated at 5,200 BTU per hour, so size it against the room’s heat loss rather than floor area alone. Insulation, window area, ceiling height, outdoor temperature, and air leaks can change the result substantially; a drafty room may need more heat than a larger, well-insulated one.
Worked example
Say a heat-loss estimate for a small room comes to 4,000 BTU per hour. The Phoenix has roughly 1,200 BTU per hour of capacity left for colder conditions. If that room needs 7,000 BTU per hour on the coldest night, a 5,200-BTU heater will run continuously and still leave the room short.
Phoenix rating5,200 BTU/h
Example room heat loss4,000 BTU/h
Remaining capacityAbout 1,200 BTU/h
Before choosing the Phoenix
Estimate heat loss or compare the room with the manufacturer’s stated coverage for your exact unit.
Check insulation, window drafts, and ceiling height before relying on a floor-area guess.
Treat thermostat cycling as a comfort and waste-control feature, not extra heating capacity.
In short
Choose the Phoenix for one small zone whose heat loss stays near or below 5,200 BTU per hour. Its wattage sets the cost ceiling; insulation and thermostat cycling determine how often you reach it.
Comparing the Heat Storm Phoenix to Other Heat Storm Models
The Heat Storm Phoenix stands apart by combining 1,500-watt zone heat with floor or wall placement, while other Heat Storm options may trade that flexibility for Wi-Fi control or a different control panel.
Model
Placement
Power and controls
What to check
Heat Storm Phoenix Infrared Space Heater with Attachable Feet
Floor or wall
1,500 W; built-in thermostat
Attach the included feet for floor use; follow the manual for wall mounting and clearances.
Heat Storm HS-1500-PHX-WIFI Infrared Heater
Check the product instructions before mounting
The HS-1500 designation indicates 1,500 W; Wi-Fi control is the defining feature in its name
Confirm the required network, mounting hardware, and included accessories.
NEW Touch Screen
Check the product instructions before mounting
Verify the listed wattage; touch-screen controls distinguish the interface
Compare physical size, mounting method, and accessories with the Phoenix before buying.
Names identify some differences, but exact dimensions and included parts must come from the product card for the unit you order.
Phoenix’s attachable feet matter if you rent, move the heater between rooms, or want floor placement without committing to a wall. Wall-only models suit a permanent installation and keep the heater off the floor, but they give up that quick change of location. A wall mount also means measuring the position, finding suitable structure, and following the listed clearance instructions rather than improvising with hardware.
Wi-Fi is the useful difference in the Heat Storm HS-1500-PHX-WIFI: remote control can help when you want to adjust the heater before entering the room, provided your network and the model’s setup requirements cooperate. The Phoenix uses its built-in thermostat, while the NEW Touch Screen model is aimed at people who prefer controls on the heater itself. A touch screen isn’t a heating upgrade by itself.
Power still matters more than the control method. The Phoenix and the HS-1500-PHX-WIFI carry 1,500-watt model designations, so their maximum electrical draw is broadly the same; a different interface won’t lower the cost at full output. Compare the physical dimensions too, since a heater that fits one wall or floor spot may crowd another.
Good for
Floor or wall placement
Soft infrared zone heat with thermostat control
Simple choice when remote access isn’t needed
Not for
No Wi-Fi control identified in the Phoenix name
Wall installation still requires careful measuring and the correct listed hardware
Exact accessories can vary by package
Pick the Phoenix when mounting flexibility and straightforward thermostat control matter more than remote access. Choose the Wi-Fi model for control away from the room, and inspect the NEW Touch Screen specifications if the on-unit interface is your priority; don’t assume the three packages have identical dimensions or mounting parts.
Installation and Maintenance for the Heat Storm Phoenix
For this Heat Storm Phoenix review, the setup is straightforward: place it where air can circulate, keep a wall-mounted unit close to a suitable outlet, and use the thermostat instead of running full power continuously. Mounting also needs a little planning because separate hardware may be necessary.
1
Choose the location
Set the heater on a stable floor or mark a wall position that follows the clearance instructions for your exact Phoenix model. If you’re mounting it, check that the power cord reaches a wall outlet without tension, and plug the heater directly into that outlet—not an extension cord or power strip.
2
Buy the right hardware
Plan to purchase mounting hardware separately if the included pieces don’t suit your wall. Match the fasteners to the wall material, and use the mounting instructions for the required hole spacing and clearances. Don’t rely on a small picture hook or a fastener that only grips drywall.
3
Set the controls
Use the remote to select the heat setting, then set the built-in thermostat near the temperature you actually want. Raising the setting far above room temperature can keep the heating element on longer and waste electricity. Once the room reaches the target, let the thermostat cycle the heater.
4
Clean before each heating season
Unplug the Phoenix and let it cool before dusting the cabinet and gently cleaning the grill. A soft, dry cloth or a vacuum brush can remove surface dust; don’t spray cleaner into the heater or poke through the grill.
Before Switching It On
Wall outlet is close enough for the cord to lie loose, with no extension cord or power strip
Mounting surface and hardware can support the heater as directed by the instructions
Front, sides and air openings are clear of furniture, curtains, bedding and stored items
Heater is uncovered and the grill is free of dust buildup
Remote has working batteries and the thermostat is set to a reasonable room temperature
Keep The Air Path Open
Never cover the Phoenix, drape anything over it, or push furniture against its intake or outlet. Blocked airflow can increase heat around the cabinet and trigger overheat protection; a heater that shuts itself off repeatedly needs a location check before you keep using it.
Heat Storm Phoenix Alternatives
Best For App Control
Heat Storm Phoenix Wi-Fi Wall Heater
Best for Bedrooms, kitchens and offices where floor space is limited
Product 2 adds Wi-Fi control, a touch-screen digital thermostat and a remote, letting you adjust the temperature from your phone. Its wall-only design saves floor space, and the cord can be hidden inside the heater when it’s installed over the outlet.
Why it made the cut
Wi-Fi temperature control from your phone
Tip-over safety shutoff
Wall-mounted design saves floor space
Good to know
Feet aren’t included, so it can’t be used on the floor
Skip it if Choose the standard Phoenix instead if you want portable floor placement.
Best for Well-insulated rooms up to 150 sq. ft. needing scheduled heat
Product 3 is the better fit when custom schedules and control from anywhere matter more than portable placement. One-touch Bluetooth setup, Wi-Fi control, a digital thermostat and a tip-over shutoff give it a more connected wall-heater setup.
Why it made the cut
Wi-Fi schedules and control from anywhere
One-touch Bluetooth setup
Tip-over safety shutoff
Good to know
Wall mount only, with no feet included
Skip it if Skip it if you need a floor-standing heater or heat for a poorly insulated room.
Is the Heat Storm Phoenix safe to use around children and pets?
The grill is designed to stay safe to touch, but children and pets can still pull the heater over, block its airflow or reach the power cord. Keep the unit on a stable surface, maintain the required clearance, use the tip-over and overheat protection if your exact model has them, and supervise it rather than leaving it running unattended.
Can I use the Heat Storm Phoenix as my primary heating source?
For a small, well-insulated room, the Phoenix can serve as the main heat source if its thermostat maintains the temperature without running constantly. It isn’t a practical replacement for a home’s central system or for heating several connected rooms, and a cold, leaky room may need more capacity.
Does the heater reduce humidity or oxygen in the room?
No fuel burns inside the Phoenix, so it doesn’t consume room oxygen or create combustion moisture. Its HMS heat exchanger is designed to use existing room humidity for soft heat; normal heating can still make a room feel drier because warmer air changes relative humidity.
What size room can the Heat Storm Phoenix effectively heat?
The Phoenix is meant for a small room or office, with performance depending on insulation, ceiling height, outdoor temperature and open doorways. Treat roughly 150 square feet as a conservative planning point for primary zone heat in a well-insulated room, then choose a different heater or add supplemental heat for larger or poorly insulated spaces.
Is the Heat Storm Phoenix portable once wall-mounted?
Wall mounting isn’t permanent, but the heater has to be removed from its mounting points before you can move it. Reattach the removable feet for floor use, place it near a suitable wall outlet, and don’t drag it by the cord.
Does the heater come with a warranty?
Product 1 includes a one-year manufacturer warranty. Keep the receipt and model information, and check the warranty terms before attempting a repair or modifying the mounting hardware.
Can I control the Heat Storm Phoenix with a smartphone app?
The standard Phoenix uses its built-in thermostat and included remote rather than smartphone control. Heat Storm sells separate Wi-Fi versions with app control, but those are different models and the wall-mounted versions may not include the Phoenix’s attachable feet.
Share
Written byJoye
HeaterGuides covers home heating, water heating and HVAC: how the equipment works, what it costs to run, and how to use it safely.
