The temperature controls on an Amana refrigerator are typically located inside the fridge compartment, often on the back wall or near the top, depending on the model.
Locating the temperature controls on your Amana refrigerator is essential for keeping your food fresh and your appliance running efficiently. Depending on your model, these controls may be inside the fridge, behind crisper drawers, or on the front panel.
Common Locations for Amana Refrigerator Temperature Controls
Amana refrigerators place temperature controls in different locations based on the model type. Here are the most common spots to check:
Top-Freezer Models
Most Amana top-freezer refrigerators feature an Up-Front Temperature Control System located inside the fresh food compartment. Look for dials or digital controls near the top right section of the refrigerator interior.
Side-by-Side Models
Modern side-by-side units typically have electronic controls on the exterior dispenser panel. Some older models may place them inside the refrigerator compartment near the top.
Bottom-Freezer Models
These models usually position controls inside the refrigerator section, often behind the crisper drawers or on the side wall. The thermostat controls may be hidden behind a small panel.
How to Adjust Your Amana Refrigerator Temperature
Proper temperature settings help your refrigerator run efficiently while keeping food at optimal freshness. Follow these steps:
- Locate your temperature controls (see locations above)
- For dial controls, turn clockwise to make colder, counter-clockwise for warmer
- For digital controls, press the temperature adjustment buttons
- Wait 24 hours between adjustments for temperatures to stabilize
- Use a refrigerator thermometer to verify actual temperatures
Recommended Temperature Settings
| Compartment | Ideal Temperature |
|---|---|
| Refrigerator | 35-38°F (1.6-3.3°C) |
| Freezer | 0°F (-18°C) |
Troubleshooting Temperature Control Issues
If your Amana refrigerator isn’t cooling properly, try these solutions before calling for service:
Check for Showroom/Demo Mode
Some models have a special mode that disables cooling for display purposes. Consult your manual to disable this feature if accidentally activated.
Verify Power Status
After power outages, some refrigerators require manual restarting. Ensure the unit is receiving power and hasn’t been accidentally turned off during cleaning.
Clean Condenser Coils
Dirty coils can affect cooling performance. Unplug the refrigerator and vacuum the coils (usually located at the back or bottom front) every 6 months.
Check Door Seals
Worn or damaged door gaskets allow cold air to escape. Test seals by closing a dollar bill in the door – if it pulls out easily, replace the gasket.
For more advanced troubleshooting of cooling systems, see our guide on appliance component maintenance.
Special Features on Modern Amana Refrigerators
Newer Amana models include innovative temperature management features:
Electronic Temperature Controls
Digital displays allow precise temperature setting and often include alerts for temperature fluctuations.
Humidity-Controlled Crispers
These specialized drawers maintain optimal moisture levels to keep produce fresh longer.
Vacation Mode
This setting maintains slightly higher temperatures when you’re away to save energy while preventing odors.
For optimal performance, refer to your specific model’s manual available on the Amana product help site. Proper temperature settings not only keep food fresh but also help your refrigerator operate efficiently, saving energy and money over time.
