Turn your heat on as soon as your indoor temperature sits below about 65°F while people are home and feeling cold. That threshold shifts a few degrees depending on your house, your health and your bills, but shivering to save a few dollars usually costs more in sleep and sickness.
You’re probably staring at the thermostat, doing the mental math between comfort and the next utility bill. There’s no magic calendar date; it’s a simple balance of indoor temperature, who’s in the home and how well your place holds heat.
Once you know your personal “turn the heat on” number and how to start the system safely, you stop second-guessing and just nudge the thermostat instead of arguing about sweaters.
When to Turn On Heat in Your House
You should turn the heat on in your house once the indoor temperature has stayed below about 65°F for more than an hour while people are home and awake. That same mark answers all the versions of this question at once: when to turn heat on, when should you turn on the heat, and when to turn the heat on in your house for the season.
In short
Turn your central heat on when the room has sat below about 65°F for an hour and people in normal indoor clothes feel cold. Raise that trigger toward 68–70°F for infants, elderly people or anyone sick, and only dip below 65°F if everyone is healthy and genuinely comfortable.
For most healthy adults, 65°F indoors is where sitting still in normal clothes starts to feel chilly, so it is a sensible trigger temperature. Households with an elderly person, an infant, or anyone sick are safer and more comfortable turning the heat on closer to 68–70°F, while some healthy adults in a dry, draft-free room might be fine down at 62–64°F if they like cooler air and move around a bit.
If you are asking “when should I turn my heat on” or “when should you turn your heat on” each fall, think in terms of that indoor number, not a date. Once your thermostat or a room thermometer keeps reading below your chosen threshold for more than an hour while you are awake and trying to relax, that is when the heat should be turned on.
The type of system does not change this decision. Furnaces, boilers, heat pumps and electric baseboards all wait for the thermostat to call for heat, so the answer to when to turn the heat on is about your comfort and health, not about whether you own a boiler or a forced-air furnace.
Waiting as long as possible before ever turning on the heat does not usually save the huge money people imagine. Heat loss mainly depends on the temperature difference between indoors and outdoors: if it is 45°F outside, holding 70°F inside is a 25°F difference and holding 65°F inside is 20°F, roughly 20% less heat loss. Say your house needed about 10 kWh of heat that evening at 70°F; at $0.17 per kWh that is $1.70, and dropping the setpoint to 65°F might cut it to around 8 kWh, about $1.36, a modest saving but not worth shivering or losing sleep over.
Comfort is the real trigger
People feel cold differently, so the real right time to turn the heat on is when you and the others in the house cannot sit comfortably for an hour in jeans and a long-sleeve shirt without feeling chilled. Use 65°F, or a bit higher for vulnerable people, as a starting point, then adjust the thermostat so the room stays just above the point where sitting still becomes uncomfortable.
How Weather, House and Lifestyle Change That
Weather, your house and your routine change when to turn heat on in winter by shifting how fast rooms cool and how cold they feel at the same reading. In practice, in places like central Minnesota, Ohio or Bowie, Maryland, most people first turn on the heat in the house after a few days when daytime highs stay under about 60°F, nights fall below about 45°F, and the indoor thermostat sits under roughly 65°F for hours.
A well-insulated, fairly airtight home can stay comfortable longer without heat than a drafty older house at the same outdoor temperature. Thick attic and wall insulation, decent windows and sealed gaps slow heat leaking out, so the indoor thermometer drifts down more slowly and you may not need to start the furnace yet even though it is cold outside.
By contrast, a leaky house with thin or missing insulation, single-pane windows and gaps around doors lets warm air escape and pulls cold air in. That kind of place often feels chilly enough to turn the heat on in the house earlier, even if the actual temperature number briefly matches the better-sealed home down the street, which is why the indoor reading today matters more than the date on the calendar.
Apartments and different rooms also behave differently. A middle apartment with neighbors above and below often gets free heat through the floor and ceiling and may stay comfortable down to 62–64°F, while a bedroom over a garage or at a windy corner of the house can feel cold and deserve heat at 66–70°F because floors and walls are colder to the touch.
Situation
Suggested indoor “turn heat on” range
Well-insulated detached house, healthy adults only
63–66°F
Drafty older house with noticeable window and door leaks
65–68°F
Middle apartment with neighbors above and below
62–65°F
Bedroom or family room over a garage or on a windy corner
66–70°F
Home with infants, elderly people or anyone ill
68–70°F
Use these indoor temperature ranges as starting points, then tune a degree or two for your household.
Regional habits shift where people land inside those bands. In colder states like Minnesota or northern Ohio, many families are happy at the lower end, perhaps 63–65°F, while in milder areas people often prefer 66–68°F, but your body and health still decide the limit, not your ZIP code or what neighbors claim to tolerate.
Humidity and air movement also change when to turn on the heat in the house. A damp, breezy 50°F day can feel colder indoors than a dry, still 45°F day because moving air strips heat from your skin and damp air makes you feel clammy, so many people nudge the thermostat on earlier on those raw, wet days even if the thermometer number looks similar.
Find your household’s real threshold
Spend a week paying attention: jot down the thermostat reading when everyone feels perfectly fine sitting around, and the readings when people start grabbing blankets or complaining it is cold. Once you see that pattern, pick a trigger temperature a degree or two above the “we are cold” number and use that as your family rule for when to turn on heat in the house; for longer-term planning, best times to turn heating on walks through how to match that trigger with lower bills.
How to Turn On the Heater Safely After Summer
For practical purposes, the answer to when to turn the heater on after summer \/\u2014 when to turn furnace on, when to turn my furnace on, when should you turn central heat on, when to turn on central heating, or when to turn on radiators \/\u2014 is: give the system a test run on the first cool day of fall, then use it any time the house sits below your comfort temperature while people are home.
1
Clear space around the furnace or boiler
Before the first start, make sure boxes, paint, clothes and anything flammable are moved at least a couple of feet away from the unit and its vents. The burner and flue area should never double as storage.
2
Check and replace the air filter
For forced-air furnaces, pull the filter from the return grille or inside the furnace compartment. If it looks gray and fuzzy or you can’t see light through it, replace it before you turn the system on, so the blower doesn’t overheat or shut off on safety.
3
Open supply and return vents
Walk the house and open floor or wall registers and main return grilles. Keeping most vents open helps air move freely and keeps duct and furnace pressures in the range the system was designed for.
4
Set the thermostat to HEAT and start gently
On the thermostat, select HEAT, set the fan to AUTO, and raise the setpoint 2–4°F above the current room temperature. Give it a few minutes; you should hear the furnace or boiler start, followed by warm air at the vents or radiators beginning to heat.
On the first startup after months off, a mild dusty or warm-metal smell for 10–20 minutes can be normal as dust burns off the heat exchanger or electric elements. Smoke, a strong chemical or burning-plastic smell, or anything that triggers smoke or CO alarms is not normal; shut the system off and investigate before trying again.
For hot-water boilers and radiators, the basic idea is the same. Confirm the boiler has power and fuel, then set the thermostat to HEAT and a few degrees above room temperature. Check that radiator valves are open by turning them fully counter-clockwise, and feel that radiators or baseboards are warming evenly; gurgling noises or radiators that stay cold at the top can mean air in the system, and boiler pressure may also need adjustment. Bleeding radiators and changing boiler pressure are simple for some people but easy to get wrong, so if you’re unsure, call a heating professional rather than learning on a flooded floor.
Quick checks before and after the first run
Clear at least a couple of feet around the furnace or boiler; no boxes, paint cans or stored items crowding it.
Confirm every fuel-burning heater (gas, oil, propane) has a working carbon monoxide alarm on the same level of the home, tested with fresh batteries.
Make sure supply and return vents in main rooms are open and not blocked by rugs or furniture.
Check that all thermostats in a multi-zone home are set to HEAT and to sensible temperatures for each area.
Look outside at furnace or boiler intake\/exhaust pipes and flues to be sure they’re not blocked by leaves, nests or snow.
After 15–20 minutes of running, walk the house: rooms should be warming, and there should be no unusual smells, smoke, or loud new noises from the unit.
Stop if anything feels unsafe
If you smell gas, see soot or scorch marks around the furnace or boiler, hear loud banging or screeching from the unit, or a carbon monoxide alarm sounds, turn the system off at the thermostat and its switch, ventilate the area if it’s safe to do so, and call a licensed technician. Don’t keep restarting a system that’s showing these warning signs.
Getting this first test out of the way on a mild day gives you time to fix surprises before the cold hits. Waiting until the coldest night to find out the blower won’t start is how people end up scrambling for backup heat and emergency service calls.
From HeaterGuides · our own guidePage 4 shows what each heater costs per hour; the 30-day plan on page 11 cuts the bill.Winter Heating Bill CutterSee what every heater in your home really costs, heat the rooms you use, and cut the waste in 30 days.Cost-per-hour tables for every heaterThermostat schedule and draft-proofing planRunning-cost and bill calculator (Excel)$14.99$9.99Get it for $9.99See what's inside and watch the 2-minute video →14-page printable PDF + Excel calculator · instant download · 30-day refund
What Temperature to Set When You First Turn Heat On
A normal starting point to set your heat on when you first turn it on is around 68°F while you’re home and awake, and 64–66°F at night for healthy adults who have decent bedding. That answers both what’s a normal temperature to set your heat on when you first turn it on and when to turn the heat on, what about at night: start at 68°F by day, trim it a few degrees while you sleep, then adjust for anyone in the house who’s more vulnerable to cold.
Daytime at about 68°F works well for most people in sweaters and socks, and it keeps heating bills reasonable. At night, many adults are comfortable at 64–66°F under blankets, but aim closer to 68–70°F for babies, elderly people, or anyone with circulation or breathing problems, and for rooms where someone is often up and moving around.
There’s no need to blast the thermostat to 75°F or 80°F the moment you turn the heat on. The furnace or boiler runs at the same rate to climb from 62°F to 68°F whether you set the thermostat to 68°F or 75°F; setting it higher only makes it run longer and overshoot, leaving you hot and paying for extra degrees you never wanted.
A simple way to find your household’s comfort setpoint is to treat 68°F as a starting guess. Hold that setting for a day or two, then nudge the thermostat down 1°F each evening until someone complains it feels chilly after they’ve been sitting for a while; the lowest temperature where everyone still feels fine becomes your standard setting for that part of the day.
Each degree you can comfortably lower the thermostat over the season shaves some heating energy, because the heater runs a bit less and heat leaks out of the house more slowly. Comfort and health come first, though, especially for kids, older adults and anyone with heart or lung issues; in those cases, don’t hesitate to keep the thermostat at the warmer end of the range or follow medical advice, and save energy in other ways like sealing drafts or upgrading best temperature to heat house settings with a programmable schedule.
Give changes time to show up
After you turn up heat in the house or drop it for the night, wait 30–60 minutes before deciding it’s too warm or too cold. That way you’re judging the steady room temperature once walls and furniture have caught up, not the first few minutes of hot or cool air from the vents.
What to Do Next If You’re Cold Right Now
Cold right now and wondering when to turn home heat on, when to turn on heat for winter, or when to turn your heat back on after summer? Turn it on once the room you’re sitting in has stayed below about 65–68°F for 20–30 minutes and you still feel cold in normal indoor clothes. That same rule answers “when should you turn on heat from the summer” and “when do you turn your heat back on”: as soon as both the thermometer and your body say “cold”.
1
Check the real room temperature
Look at the thermostat’s current reading, not just its setpoint; if you’re unsure it’s accurate, use a simple digital thermometer in the main room and give it five minutes to settle.
2
Compare it to 65–68°F and try quick fixes
If it reads around 64–66°F and you’re only mildly chilly, you’re right on the edge of the comfort band. First add a layer, put on socks, close obvious drafts and curtains, and wait 20–30 minutes to see if you’re comfortable without touching the heat.
3
Turn central heat on if you’re still cold
If, after that, the room is still under about 65–66°F and you feel cold sitting still, that’s when to turn the furnace, boiler or heat pump on for winter. Switch the thermostat from COOL or OFF to HEAT, set it a few degrees above the current reading (for example, room at 64°F, thermostat to 68°F), then listen for the system to start and sniff the air; a faint dusty smell that fades is normal after summer, but loud bangs, smoke or a strong gas smell mean shut it off and call a pro.
4
Plan a backup if central heat isn’t an option
If you can’t control the building’s main thermostat, the system is down, or you only need one room warmer, use a modern plug‑in electric space heater. Plug it directly into a wall outlet (never an extension cord or power strip), keep at least three feet of clearance from anything that can burn, and turn it off whenever you leave the room or go to sleep.
Spot heating with a plug‑in unit is usually the fastest way to get comfortable in the room you’re actually using while you wait for central heat to come on or be repaired. If you’d like that extra warmth to also look good in a living room or bedroom, an electric fireplace‑style heater with 500/1500 W settings and a separate flame effect can take the edge off the space without changing the thermostat for the whole house.
If your living room is chilly but the bu
R.W.FLAME Electric Fireplace Heater 17″ with Remote Control, Metal, B…
The R.W.FLAME electric fireplace heater uses 500 W or 1,500 W infrared heat plus a visible flame effect to warm the room you’re in while you wait on central heat, and its overheat protection adds a safety backstop. Treat it as a one‑room heater to make a seating area comfortable, not as a way to heat an entire home.
Quickly warming the room you’re actually sitting in without wasting energy on empty rooms.
Renters, roommates or seniors who can’t control the main thermostat but need their own space comfortable.
Getting through a cold spell or a furnace repair without shivering through the whole house.
Not for
Whole‑house heating — a typical 1,500 W plug‑in heater is sized for roughly one small to medium room, not an entire floor.
Running all day in multiple rooms, which can cost more than a reasonably efficient central system at the same indoor temperature.
Circuits that already serve big loads, because a 1,500 W heater draws around 12.5 A and can trip a 15 A breaker if the circuit is shared.
Frequently Asked Questions
When should I turn my heat on at night?
For night-time, turn the heat on if the bedrooms will fall below about 64–66°F while people are sleeping or anyone is already climbing into bed feeling chilled. Set a programmable or smart thermostat to start heating 30–60 minutes before your usual bedtime so the walls, mattress and bedding have time to warm up. If someone is elderly, sick, or an infant, aim a few degrees warmer and use extra blankets rather than trying to run the house very cold overnight.
When should central heating be turned on for winter?
Central heating systems are usually worth turning on for the season once your indoor temperature stays under the mid‑60s for most of the day across two or three cool days in a row. Many people do a short “test run” on the first chilly weekend of fall so they can find any issues before the first hard freeze. If you like to delay, at least switch the system on long enough to check that the burner, blower and thermostat all cycle correctly.
When should I turn on my radiators?
Radiators take longer to warm a room than forced air, so you want them on before you feel really cold. A good rule is to open the radiator valves or run the boiler when the room is around 66–68°F and you expect clouds, wind, or sunset to keep it dropping. At the start of the season, also bleed air from radiators that gurgle or only get hot at the bottom, then check again that the room reaches the temperature you expect.
When does the heat have to be turned on in apartments?
In apartments, the official “heating season” and minimum temperatures come from local housing codes and your lease, not from a fixed date nationwide. Many US cities require landlords to keep occupied apartments around the upper‑60s by day during heating season, but the exact numbers vary. If your unit sits in the low‑60s for hours while the heat is off, document the readings with a cheap room thermometer and contact your landlord or local housing office to see what rules apply.
What is a normal temperature to set your heat on when you first turn it on?
A normal first setting is about 68°F in living areas, with 64–66°F in bedrooms if everyone is healthy and has decent bedding. Start there for a full day and then adjust one degree at a time until people stop feeling either chilled or stuffy. For babies, older adults, or anyone with circulation problems, keep the occupied rooms a couple of degrees warmer and watch for cold hands, noses, or complaints rather than chasing a specific number.
When I turn on my oil boiler, will it heat the water automatically?
An oil boiler only heats your tap water automatically if your system was built to do that, using either a tankless coil inside the boiler or a separate indirect water heater tank piped to it. In those setups the boiler can fire in summer for hot water even when the room thermostat is turned down. If you also have a standalone gas or electric water heater tank with its own burner or elements, then the oil boiler most likely serves only the radiators or baseboards. Any time you are unsure how yours is piped, have a heating contractor trace and label the system instead of guessing.
Before you go · a welcome giftGet the Winter Heating Bill Cutter for $4.99See what every heater in your home really costs, heat the rooms you use, and cut the waste in 30 days. Normally $14.99; your welcome price saves $10.00. We'll email your link right now.or buy it now for $9.99 without the gift →One email with your link now. We never share your address.