Skip to content
HeaterGuides
Space Heater

Is the Dreo WH719S Smart Wall Heater Worth It? A Deep Dive

On this page 8 sections
  1. The Specs
  2. How the Dreo WH719S Smart Wall Heater Warms Your Space
  3. Limits and Trade-Offs of the Dreo WH719S Wall Heater
  4. Running Costs for the Dreo WH719S Heater
  5. Safety Features Built Into the Dreo WH719S
  6. Comparing the Dreo WH719S to Other Wall Heaters
  7. Dreo WH719S Smart Wall Heater Review
  8. Questions People Ask
Our verdict
The Dreo WH719S Smart Wall Heater is worth it if you want precise, consistent heating in a medium-sized room and appreciate smart controls like app and voice operation. It excels at delivering steady warmth with a high level of temperature accuracy. However, it’s not suitable for very small rooms or users without reliable Wi-Fi, as those conditions reduce its benefits.
Buy it if
Tech-savvy users needing consistent heat in medium rooms.
Skip it if
You have a very small room or no Wi-Fi access.

Say you have a 12-by-16-foot bedroom that feels chilly on winter mornings. You want a heater that warms the whole room quickly, lets you control it remotely, and doesn’t keep you up at night. The Dreo WH719S promises smart features, widespread warmth, and quiet operation to fit that need.

This review breaks down what this heater delivers, where it falls short, how much running it costs, and how it stacks up against other wall-mounted electric heaters.

What to remember
The heater covers rooms up to about 200 sq ft effectively with 1500 watts and 120° vertical oscillation.
It offers precise temperature control from 41°F to 95°F, adjustable in 1°F increments for steady comfort.
Smart features include scheduling, app control from anywhere, and voice commands via Alexa and Google Home.
Installation is straightforward with included guides and accessories; maintenance is minimal with a reusable filter.
Requires a reliable Wi-Fi connection for full smart functionality and might be too powerful for very small rooms.

The Specs

Power1500 W
Temperature range41 to 95°F
Oscillation angle120° wide
ControlDREO app, Alexa, Google Home
Noise levelLow, bedroom friendly
InstallationWall mounted, includes guide

How the Dreo WH719S Smart Wall Heater Warms Your Space

The Dreo WH719S uses a 1,500 W PTC ceramic heating element to deliver fast, steady warmth ideal for medium-sized rooms up to about 200 square feet. This power level matches the standard maximum for plug-in electric heaters, drawing roughly 12.5 amps on a 120 V circuit.

The heater mounts on your wall, freeing floor space and spreading heat without blocking airflow. It oscillates vertically over a 120° arc, directing warm air evenly from floor to ceiling. That wide oscillation helps avoid hot spots and keeps the room comfortable from top to bottom.

PTC ceramic elements self-regulate as they heat up, preventing spikes and offering more consistent warmth than metal coils. The unit’s thermostat can be set precisely between 41°F and 95°F with 1°F accuracy. This fine temperature control is rare among wall-mounted electric heaters and lets you dial in the exact comfort level you want.

Being a smart electric heater, the WH719S connects to your home Wi-Fi and supports app and voice commands, making it easy to adjust settings remotely or automate heating schedules. Unlike gas wall-mounted heaters, it doesn’t require venting or fuel lines, so installation is simpler and safer indoors.

The smart controls and ceramic element combine for quick response and reliable operation, so your medium room heats efficiently without uneven spots or wasted energy.

Limits and Trade-Offs of the Dreo WH719S Wall Heater

smart electric heaters wall mounted: Limits and Trade-Offs of the Dreo WH719S Wall Heater

The Dreo WH719S isn’t suited for very small rooms under 100 square feet because 1,500 W of heat output would be overkill and might cause discomfort or short cycling. It’s built to handle medium spaces, not tiny nooks.

Its smart features rely on a strong, stable Wi-Fi connection. If your signal is weak or unreliable, app control and voice commands can become frustrating or fail altogether. This dependence also means no offline control beyond the physical buttons.

The heater’s vertical oscillation angle is fixed at 120°, with no manual adjustment option. You can’t narrow or widen the sweep, so if your room layout demands more directed airflow, this model won’t adapt.

Power outages leave the WH719S powerless, as it has no battery backup or alternative power source. If you lose electricity, the heater stops heating immediately, unlike some gas or kerosene wall heaters that might run without grid power.

If you need a compact, smart, wall-mounted electric heater and have reliable Wi-Fi, the WH719S is a solid choice. Avoid it for small rooms, unreliable internet, or if you require adjustable oscillation.

From HeaterGuides · our own guidePage 4 shows what each heater costs per hour; the 30-day plan on page 11 cuts the bill.Winter Heating Bill Cutter: the printable guide and its Excel calculatorWinter Heating Bill CutterSee what every heater in your home really costs, heat the rooms you use, and cut the waste in 30 days.Cost-per-hour tables for every heaterThermostat schedule and draft-proofing planRunning-cost and bill calculator (Excel)$14.99 $9.99Get it for $9.99See what's inside and watch the 2-minute video →14-page printable PDF + Excel calculator · instant download · 30-day refund

Running Costs for the Dreo WH719S Heater

smart electric heaters wall mounted: Running Costs for the Dreo WH719S Heater

Smart electric heaters wall mounted like the Dreo WH719S draw a steady 1,500 watts when running at full power. That means for every hour it runs, it uses 1.5 kilowatt-hours (kWh) of electricity.

Electricity costs vary, but a common rate in the US is about 17 cents per kWh. Running the Dreo WH719S for 8 hours would consume 12 kWh (1.5 kW × 8 hours). At 17 cents per kWh, that adds up to around $2.04 per day.

Monthly, running the heater for 8 hours daily would total about 360 kWh (12 kWh × 30 days), costing roughly $61.20 at this rate. If you run it fewer hours, costs drop proportionally. For example, 4 hours daily would be about $1.02 per day.

This running cost is typical for any 1,500 W space heater, whether wall-mounted or portable. The Dreo WH719S doesn’t use less power, but its precise thermostat and fast heating might reduce run times compared to less efficient heaters.

Keep in mind that actual costs depend on your local electricity rate and how often you run the heater. The WH719S’s smart controls can help optimize usage by letting you schedule or adjust heat remotely, potentially lowering bills.

If you want to compare, standard 1,500 W plug-in heaters will cost about the same to run per hour, but they usually lack the smart thermostat controls and wall installation that make the WH719S more convenient and energy-conscious.

Safety Features Built Into the Dreo WH719S

Smart electric heaters wall mounted like the Dreo WH719S include built-in overheat protection to prevent damage or fire risk. The heater automatically shuts off if internal temperatures get too high.

Since it mounts on the wall, the WH719S doesn’t have a tip-over switch, which is a common safety feature on portable heaters. The wall installation removes the risk of accidental tipping or blocking by furniture.

The heater’s LED display panel dims automatically at night. This reduces light pollution in bedrooms or living rooms while still allowing you to check settings if needed.

The Dreo WH719S meets UL and ETL safety certifications, confirming it complies with widely accepted electrical safety standards for home use. That includes wiring, thermal protection and materials tested to prevent hazards.

For safe use, install the heater according to the manual’s instructions, keep clearances around the unit, and never cover the heater. Also, ensure your home has working smoke and carbon monoxide alarms as a general safety measure when running any electric or fuel-burning heater.

Comparing the Dreo WH719S to Other Wall Heaters

Smart electric heaters wall mounted like the Dreo WH719S stand apart with precise temperature control and remote operation, features that traditional fixed-temperature wall heaters lack.

Compared to other Dreo models such as the FortPlug variant, the WH719S offers more advanced app integration and voice commands, making it easier to adjust settings from anywhere. The FortPlug version typically relies on a simpler plug-in design and manual controls, which suits users who prefer straightforward operation without Wi-Fi dependency.

Traditional wall heaters often use a basic thermostat with limited temperature settings and no connectivity. That means you adjust heat levels on the unit itself, which can be inconvenient if the heater is mounted high or in a hard-to-reach spot. The WH719S’s smart app lets you set schedules, monitor energy use, and control the heater remotely, helping maintain comfort efficiently.

Voice control compatibility with Alexa or Google Assistant adds hands-free convenience, useful when you’re busy or arriving home in cold weather. This contrasts with manual-only models that require physical interaction every time you want to change the temperature.

Smart features benefit tech-savvy users and those seeking energy savings through precise control and automation. People comfortable with smartphones and home automation will get the most out of the WH719S. Conversely, if you have no reliable Wi-Fi or prefer a simple, always-on heater, a traditional fixed-temp model or the FortPlug variant might be a better fit.

Room size and heating needs also matter. The WH719S suits medium rooms where fine temperature tuning and app control add value, while basic models can suffice in smaller or rarely used spaces.

For a closer look at other Dreo wall heaters that balance smart features and heating power, consider the dreo wall-mounted heater buying guide.

Dreo WH719S Smart Wall Heater Review

Enhanced Safety
DREO Smart Wall Heater 1500W FortPlug

DREO Smart Wall Heater 1500W FortPlug

Best for Users wanting extra fire safety features in bedroom heaters
This version adds DREO’s FortPlug technology, which cuts power if the plug area overheats, reducing fire risk. It keeps all the smart controls and wide oscillation of the standard model, delivering fast, even heat with app and voice control.
Why it made the cut
Built-in overheat protection in the plug
Smart app and voice control
120° wide oscillation for even heat
Good to know
Requires Wi-Fi for smart features
Same installation needs as the standard model
Skip it if Skip if you don’t need plug-level overheat protection but want smart features.
View on AmazonPaid link · live price on Amazon
Adjustable Oscillation
Dreo Smart Wall Heater 1500W Vertical Oscillation

Dreo Smart Wall Heater 1500W Vertical Oscillation

Best for Larger rooms or offices needing adjustable heat spread
This heater offers adjustable oscillation angles (60°, 90°, 120°) for more control over heat direction. It includes overheat protection and supports voice and app control, making it a versatile choice for bigger spaces needing precise comfort.
Why it made the cut
Adjustable oscillation angles for targeted heating
Overheat protection for safety
Smart controls with voice and app access
Good to know
More complex installation
May be more than needed for small bedrooms
Skip it if Not ideal if you want simple fixed-angle heating for a small room.
View on AmazonPaid link · live price on Amazon

Questions People Ask

Can the Dreo WH719S be used in bathrooms or damp areas?
The Dreo WH719S is not rated for use in bathrooms or damp areas. It lacks the specialized water-resistant features and ALCI plugs needed for safe operation in such environments. Using it where moisture is present risks electric shock and voids the warranty.
How accurate is the temperature control on the Dreo WH719S?
The heater offers precise temperature control with a 1°F accuracy, letting you set the room temperature anywhere from 41°F to 95°F. This fine control helps avoid wide swings in heat output and maintains a comfortable environment consistently.
Does the heater continue to heat if Wi-Fi goes down?
If Wi-Fi connectivity is lost, the Dreo WH719S will continue to heat using its last set temperature and settings. However, you won’t be able to adjust settings remotely via the app or voice control until the connection is restored.
What is the recommended room size for the Dreo WH719S?
It’s designed for medium rooms up to about 200 square feet. Smaller rooms under 100 square feet might find its 1,500 W output too strong, leading to frequent cycling or overheating sensations.

Joye Editor

HeaterGuides covers home heating, water heating and HVAC: how the equipment works, what it costs to run, and how to use it safely.

More in Space Heater